Residential
Twin-Flo BRT Garage Heaters Convector Steam/Hot Water Unit
Commercial
Hydronic Products Gas-Fired Products Oil-Fired Products

Beacon/Morris Commercial/Industrial Products    [ Français ]
Hydronic Products  >  Cabinet Unit Heater  |  Convector  |  Twin-Pak  |  Steam/Hot Water Unit Heaters

Cabinet Unit Heaters
Selection and "Rough In" Made Easy - Only the Lengths Vary

The Beacon-Morris Cabinet Unit Heater is the industry's most recent design. Years of manufacturing and engineering experience combined with a concern for appearance have resulted in a crisply styled unit that will blend with almost any room decor and provide reliability, durability, individual control and quiet operation. The wide selection of floor, wall and ceiling units with a variety of air flow arrangements allows for exactly matching design requirements. Field repainting to match the decor is possible and factory applied decorator colors are available as an option. Recessed models are provided with a field installed wall seal that allows for full or partial recessing depending on the model. The wall seal is also available as an optional kit for full or partial recessing of most other models.

As unit size increases, only the length changes. The depth and height remain constant, thus allowing the designer to have uniformity of appearance when units of various sizes are installed in adjacent areas. The standard 16 gauge front panel is rugged enough to withstand harsh treatment. Exposed cabinetry is provided with a prime coat of neutral eggshell baked enamel, which in many instances can serve as the finish. Back and side panels are 18 gauge. The pedestal base for floor models is painted black and is the height of most mop boards. The solid state speed control provides infinite variations from high to low speed, giving the occupant finger tip control over fan speed and room temperature.

Beacon-Morris cabinet unit heaters are CSA certified.

clear
CABINET UNIT QUESTIONS?
For technical assistance, (installation, ratings, troubleshooting), e-mail us at tech2@beacon-morris.com.

For customer service (parts, reps, wholesalers), e-mail us at sales@beacon-morris.com.

PRODUCT LITERATURE
Download catalogs, IO&M manuals, and technical specifications in .PDF format for this product.

  Cabinet Unit Heater Check List and Start Up (35KB)

  Speed Control Minimum Speed Adjustment (361KB)

 Color Chart (MCS-2) (105KB)

 Accessories - Metric Submittal (CBS-A-13M) (259KB)

 Accessories - US Submittal (CBS-A-13) (206KB)

 Ceiling Mounted Units (Non Recessed Only) - Metric Submittal (CBS-C-13M) (313KB)

 Ceiling Mounted Units (Non Recessed Only) - US Submittal (CBS-C-13) (354KB)

 Cabinet Unit Heater Options (SCVO-7) (4MB)

 Cabinet Unit Heater Catalog (BCUH-14R) (3MB)

 Installation, Operation, and Maintenance Manual (CUH-5) (238KB)

 Floor Mounted Units - Metric Submittal (CBS-F-13M) (456KB)

 Floor Mounted Units - US Submittal (CBS-F-13) (483KB)

 Floor Mounted Units - Metric Submittal (CBS-F-13M) (456KB)

 Floor Mounted Units - US Submittal (CBS-F-13) (483KB)

 Slope Top Units - Metric Submittal (CBS-FS-13M) (435KB)

 Slope Top Units - US Submittal (CBS-FS-13) (518KB)

 Slope Top Units - Metric Submittal (CBS-FS-13M) (435KB)

 Slope Top Units - US Submittal (CBS-FS-13) (518KB)

 Recessed Ceiling Unit - US Submittal (CBS-RC-13) (401KB)

 Recessed Ceiling Units - Metric Submittal (CBS-RC-13M) (303KB)

 Recessed Wall Mounted Unit - US Submittal (CBS-RW-13) (443KB)

 Recessed Wall Mounted Units - Metric Submittal (CBS-RW-13M) (366KB)

 Recessed Wall Mounted Unit - US Submittal (CBS-RW-13) (443KB)

 Recessed Wall Mounted Units - Metric Submittal (CBS-RW-13M) (366KB)

 Wall Mounted Units - Metric Submittal (CBS-W-13M) (412KB)

 Wall Mounted Units - US Submittal (CBS-W-13) (449KB)

 Wall Mounted Units - Metric Submittal (CBS-W-13M) (412KB)

 Wall Mounted Units - US Submittal (CBS-W-13) (449KB)

Mestek: Experience based innovation
Bookmark and Share
A Mestek Company.  Copyright © 2003 Mestek Technology, Inc.   All Rights Reserved. · Terms & Conditions · Terms of Use Made in the USA