Twin-Flo BRT Garage Heaters Convector Steam/Hot Water Unit Panel Radiators and Towel Warmers
Hydronic Products Gas-Fired Products Oil-Fired Products Optum

Beacon/Morris Commercial/Industrial Products    [ Français ]
Gas Fired Products
Propeller Units

Propeller type unit heaters are typically utilized to heat large open areas. Units are designed to be installed a minimum of 8 feet high and are available with optional downturn nozzles to assist in directing the air to the floor. Propeller unit heaters should never be used with any type of discharge duct work. Available in sizes from 30 to 400 MBH.
Blower Units

Blower units are typically installed where discharge duct work is utilized or operating noise is an issue. Similar to the propeller type units except a centrifugal blower is used to overcome the static pressure of the duct work.
Duct Furnaces

Duct Furnaces are utilized in applications where the airflow is provided by a separate air handler. Typically utilized in "built up" type system. A stainless steel heat exchanger is recommended for systems utilizing a cooling coil.

Mestek: Experience based innovation
Bookmark and Share
A Mestek Company.  Copyright © 2003 Mestek Technology, Inc.   All Rights Reserved. · Terms & Conditions · Terms of Use Made in the USA