Residential
Twin-Flo BRT Garage Heaters Convector Steam/Hot Water Unit
Commercial
Hydronic Products Gas-Fired Products Oil-Fired Products

Beacon/Morris Commercial/Industrial Products    [ Français ]
Gas Fired Products  >  Propeller Units  |  Blower Units  |  Duct Furnaces

Duct Furnaces  >  Model BMED/BMES  |  Model BMSD

Model "BMED" & "BMES"
The "BMED" and "BMES" are power vented indoor duct furnaces. Model "BMED" offers bottom burner access and is typically ceiling suspended. The model "BMES" offers side access and is typically mounted on a non-combustible floor. Both models offer high efficiencies that achieve annual fuel savings of up to 25% over conventional natural vented unit heaters. Also featured is the factory installed power venter and sealed flue collector that controls combustion and excess air during on cycles.

STANDARD FEATURES:

  • 10 sizes ranging from 100-400 MBH
  • ETL certified for 80% efficiencies
  • Aluminized steel heat exchanger 20 gauge
  • Optional 409 and 321 stainless steel heat exchangers
  • Single stage gas valve (STD)
  • Optional two stage and modulating gas valves
  • Standard spark ignition
  • Available in Natural or LP gas
  • Easy burner access with individual removable burners
  • Factory test fired
  • 1 Year Warranty


ETL Certified ETL Verified
clear
BMED & BMES QUESTIONS?
For technical assistance, (installation, ratings, troubleshooting), e-mail us at tech1@beacon-morris.com.

For customer service (parts, reps, wholesalers), e-mail us at sales@beacon-morris.com.

PRODUCT LITERATURE
Download catalogs, IO&M manuals, and technical specifications in .PDF format for this product.

  Gas-Fired Indoor Equipment Replacement Parts Catalog BMPC-7 (2MB)

  Gas-Fired Indoor Equipment Replacement Parts Catalog BMPC-7 (2MB)

 Installation & Service Manual DSIM-15 (1MB)

  BMEB High Efficiency Gas-Fired Blower Unit Heater Submittal (BEBS-10) (273KB)

  Gas-Fired Indoor Equipment Replacement Parts Catalog BMPC-7 (2MB)

 Power Vented Gas Fired Blower Unit Heaters IIEB-11 (1MB)

  Gas-Fired Indoor Equipment Replacement Parts Catalog BMPC-7 (2MB)

 Gas-Fired Indoor Duct Furnace Submittal (BDFS-10) (391KB)

 Installation, Operation and Maintenance Manual for BMED/BMES Gas-Fired Indoor Duct Furnaces (DISM-17R) (1MB)

  BMEF High Efficiency Gas Fired Propeller Unit Submittal (BEPS-11) (244KB)

  Gas-Fired Indoor Equipment Replacement Parts Catalog BMPC-7 (2MB)

 Installation Instructions & Parts List, Power Vented Propeller Unit Heaters IIEP-15 (1MB)

  Gas-Fired Indoor Equipment Replacement Parts Catalog BMPC-7 (2MB)

 Gas-Fired Indoor Duct Furnace Submittal (BDFS-10) (391KB)

 Installation, Operation and Maintenance Manual for BMED/BMES Gas-Fired Indoor Duct Furnaces (DISM-17R) (1MB)

  Gas-Fired Indoor Equipment Replacement Parts Catalog BMPC-7 (2MB)

 Installation Instructions & Parts List, Propeller Unit Heaters IIPLM-20 (1022KB)

 Gas-Fired Propeller Unit Heater BGPS-7 (63K)

  Gas-Fired Indoor Equipment Replacement Parts Catalog BMPC-7 (2MB)

 Installation & Service Manual DSIM-15 (1MB)

  BMSB Separated Combustion Blower Unit Heater Submittal (BVSB-9) (195KB)

  Gas-Fired Indoor Equipment Replacement Parts Catalog BMPC-7 (2MB)

 Separated Combustion Gas Fired Blower Unit Heaters (BSCII-7) (938KB)

  Gas-Fired Indoor Equipment Replacement Parts Catalog BMPC-7 (2MB)

 Installation & Service Manual SCDFM-4 (1MB)

  BMSF Separated Combustion Propeller Unit Heater Submittal (BVSF-8) (305KB)

  Gas-Fired Indoor Equipment Replacement Parts Catalog BMPC-7 (2MB)

 Installation Instructions & Part List for Separated Combustion Gas Fired Propeller Unit Heaters (PSCII-8) (2MB)

 BRT Gas Fired Tubular Unit Heaters Replacement Parts Catalog (BRTPC-4) (755KB)

 LP to NG Gas Conversion Kit for 30-120 BTU/HR Tubular Unit Heaters with Direct Spark Ignition Installation Instructions (J30-08603 2/2014) (324KB)

 NG to LP Gas Conversion Kit for 30-120 BTU/HR Tubular Unit Heaters with Direct Spark Ignition Installation Instructions (J30-08602 2/2014) (327KB)

 Tubular BRT Gas Fired Direct Spark Propeller Unit Heaters (GG-IOM-13) (4MB)

 Tubular Gas Fired Unit Heaters Catalog (BTUC-11) (6MB)

 Tubular Gas-Fired Unit Heater Replacement Parts Catalog BTUPC-9 (1MB)

 4" Combustion Air Inlet Kit Installation Instructions - for BRT 30 - 75 only (ASX7-4-IOM-7) (403KB)

 5" Combustion Air Inlet Kit Installation Instructions - for BRT 90-120 only (ASX7-5-IOM-7) (445KB)

 BRT 30-120 Tubular Unit Heater Product Data Sheet (BRTPD-2) (2MB)

 Tubular Gas Fired Unit Heaters Catalog (BTUC-11) (6MB)

 BSC - Separated Combustion Tubular Blower Style Gas Fired Unit Heater Submittal (BSCS-2) (346KB)

 BSC - Separated Combustion Tubular Blower Style Unit Heater Installation & Operation Manual (STBII-4) (2MB)

 Installation & Service Manual for Horizontal Combustion Air Inlet Kits (Used with Separated Combustion Tubular Unit Heaters) (HCAK-IOM-5) (640KB)

 Installation & Service Manual for Vertical Combustion Air Inlet Kits (Used with Separated Combustion Tubular Unit Heaters) (VCAK-IOM-5) (798KB)

 IOM for Y-Splitter Nozzle for Tubular Unit Heaters 100-400 (J30-09491 12/14) (176KB)

 Replacement Parts Catalog for Tubular Direct Spark Gas Fired Unit Heaters (BSCTPC-2) (3MB)

 Tubular Gas Fired Unit Heaters Catalog (BTUC-11) (6MB)

 BSF - Separated Combustion Tubular Propeller Style Gas Fired Unit Heater Submittal (BSFS-2) (366KB)

 Installation & Service Manual for Horizontal Combustion Air Inlet Kits (Used with Separated Combustion Tubular Unit Heaters) (HCAK-IOM-5) (640KB)

 Installation & Service Manual for Vertical Combustion Air Inlet Kits (Used with Separated Combustion Tubular Unit Heaters) (VCAK-IOM-5) (798KB)

 Installation Instructions and Parts Identification for Separated Combustion Tubular Gas Fired Direct Spark Propeller Units (STPIM-3) (2MB)

 IOM for Y-Splitter Nozzle for Tubular Unit Heaters 100-400 (J30-09491 12/14) (176KB)

 Replacement Parts Catalog for Tubular Direct Spark Gas Fired Unit Heaters (BSCTPC-2) (3MB)

 Tubular Gas Fired Unit Heaters Catalog (BTUC-11) (6MB)

 BST 30-75 Separated Combustion Direct Spark Tubular Unit Heaters DSSCT-IOM-1 (1.5MB)

 Model BST 30-75 Separated Combustion Low Profile Units BSTS-2 (110K)

  Tubular Blower Style Unit Heater Catalog (BTCSB-1) (155KB)

 BTC 100-400 Tubular Blower Unit Heater Submittal (BTCS-2) (325KB)

 Installation Instructions for BTC Tubular Blower Unit Heater (TBII-4) (2MB)

 IOM for Y-Splitter Nozzle for Tubular Unit Heaters 100-400 (J30-09491 12/14) (176KB)

 Replacement Parts Catalog for Tubular Direct Spark Gas Fired Unit Heaters (BSCTPC-2) (3MB)

 Tubular Gas Fired Unit Heaters Catalog (BTUC-11) (6MB)

 Air Inlet Kit Installation Instructions (AIK-IOM-1) (464KB)

 BTD Catalog (BTD-1) (215KB)

 BTD Installation Instructions and Service Manual (TDII-1) (1MB)

 BTD Submittal (BTDS-1) (321KB)

 Horizontal Combustion Air Inlet Kit Installation Instructions (HAIK-IOM-1) (486KB)

 Replacement Parts Catalog for Tubular Direct Spark Gas Fired Unit Heaters (BSCTPC-2) (3MB)

 Vertical Combustion Air Inlet Kit Installation Instructions (VAIK-IOM-1) (649KB)

 BTU 100-400 Tubular Design Gas Fired Unit Heater Submittal (BTUS-9) (271KB)

 BTU 100-400 Tubular Gas Fired Direct Spark Propeller Unit Heaters (DSTBIM-14) (2MB)

 BTU 30-90 Tubular Gas Fired Direct Spark Propeller Unit Heaters DSTM-1 (1.5MB)

 IOM for Y-Splitter Nozzle for Tubular Unit Heaters 100-400 (J30-09491 12/14) (176KB)

 Replacement Parts Catalog for Tubular Direct Spark Gas Fired Unit Heaters (BSCTPC-2) (3MB)

 Tubular Gas Fired Unit Heaters Catalog (BTUC-11) (6MB)

 Model BRU &BTU 30-90 Low Profile Units BLPS-4 (88K)

  Gas-Fired Indoor Equipment Replacement Parts Catalog BMPC-7 (2MB)

  Gas-Fired Indoor Products Catalog (BGUH-8) (1MB)

 BRT Low Profile Tubular Gas Fired Unit Heater Submittal (BRTS-7) (991KB)

 Tubular Gas Fired Unit Heaters Catalog (BTUC-11) (6MB)

Mestek: Experience based innovation
Bookmark and Share
A Mestek Company.  Copyright © 2003 Mestek Technology, Inc.   All Rights Reserved. · Terms & Conditions · Terms of Use Made in the USA